May your Thanksgiving be full of joy and happiness | 50% on everything | Use THANKS at checkout !!

Commercial Plumbing Inspector (P2) Practice Exam

Commercial Plumbing Inspector (P2) Practice Exam


About Commercial Plumbing Inspector (P2) 

As a Commercial Plumbing Inspector (P2) you will be responsible to verify the design, installation and inspections for all commercially installed plumbing systems complete with their fixtures, equipment, appurtenances, and appliances. Also, as a Commercial Plumbing Inspector shall also be responsible to verify the installation, design, and inspections for all stormwater systems, special waste systems, and all non-flammable medical and nonmedical oxygen piping systems and compliance with the International Plumbing Code and the standards of the local jurisdiction.


Roles and Responsibilities

The Roles and Responsibilities as a Commercial Plumbing Inspector will include and not limited to the verification of the following

  • Proper pipe sizing, installation, design, and testing for the DWV system
  • Potable and nonpotable water supply and storage systems; the installation of all fixtures, appurtenances, and appliances
  • Installation of all regulated safety devices, water heater installation, and appurtenances
  • Installation, design, and protection of all specialty fixture that serve special functions and the connections to the DWV and water supply systems
  • Design, pipe sizing, and testing for the storm drainage system; the design, installation of all special piping and storage systems for non-flammable medical gases and non-medical oxygen systems
  • All permitting, documentation and approved drawings have been filed and completed.


Exam Details

  • Exam Name: Commercial Plumbing Inspector 
  • Exam ID: P2
  • Category: Florida DBPR
  • Code Year: 2021
  • Total Questions: 60
  • Exam Time: 2:30 hours
  • Exam Type: Open Book
  • Exam Fees: $219 USD


Course Outline

The Commercial Plumbing Inspector (P2) Exam covers the following topics - 

General Requirements10%

Piping Protections

Inspect all piping systems to insure protection as required from corrosion, stress and strain, freezing, and physical damage.

6%

Piping Installation, Support, Sleeving, and Penetrations

Inspect all piping systems for proper installation, support, sleeving, penetrations (fire, structural, etc.), and waterproofing of exterior openings. Verify that all required tests of installed piping systems are conducted.

4%
Fixtures12%

Fixture and Material Approvals

Inspect for approved materials and fixture approvals.

2%

Installation, Location, Clearance, and Access

Inspect for proper installation of fixtures including accessibility, waste receptors, appliances, and appurtenances, including clearances, access, and sealing.

6%

Flow Rates

Inspect for maximum and minimum flow rates and temperature control valves. Inspect for proper installation of faucets, fixture fittings, and accessories.

4%
Water Heaters14%

Installation Requirements

Inspect for proper use and installation of materials, listing, and labeling, including clearances, locations, protection, pans, and seismic restraint, and check for appliance approval. Inspect for required valving, T&P valve and discharge piping installation, and thermal expansion requirements.

6%

Gas Piping, Combustion Air, and Venting

Inspect for proper sizing of fuel gas piping, combustion air requirements, and required venting.

8%
Water Supply and Distribution14%

Materials, Joints, and Connections

Inspect the service and distribution piping for proper installation of cold and hot water delivery including minimum and maximum pressure and volume requirements, identification, sizing, valving, insulation, and safety.

4%

Identification, Sizing, and Valving

Inspect the potable water supply and distribution piping for proper protection against contamination. Inspect installation of water treatment systems.

6%

Protection Against Contamination and Treatment

Inspect the potable water supply and distribution piping for proper protection against contamination. Inspect installation of water treatment systems.

4%
Sanitary Drainage16%

Materials and Fittings

Inspect for approved materials and use of proper fittings, joints, and connections.

4%

Sizing of System

Inspect for proper sizing and installation of the building drain, building sewer, branches, and stacks.

4%

Valves, Sumps, Ejectors, and Cleanouts

Inspect for the proper installation of backwater valves, sumps, ejectors, and required cleanouts.

4%

Indirect Waste

Inspect indirect waste systems for air breaks, air gaps, interceptors, condensate drains, pumps, and tanks.

4%
Vents12%

Materials, Joints and Connections, and Grade

Inspect for approved materials, joints, connections, and proper grades.

6%

Sizing Method, and Installation

Inspect for proper sizing and the minimum venting requirements, methods, and installation.

6%
Traps, Interceptors, Separators, Special Piping, and Storage Systems10%

Installation Requirements

Inspect for proper use, installation, and connection of traps, interceptors, and separators.

6%

Chemical Treatment, High Temperature, and Neutralization Systems

Inspect chemical treatment, high-temperature, and neutralization systems.

4%
Storm Drainage6%

Materials Sizing and Installation

Inspect roof drains, conductors, and leaders for proper use of approved materials, sizing, and installation.

4%

Sub-soil Sub-drains

Inspect sub-soil and building sub-drains, sumps, and pumping systems.

2%
Health Care Plumbing6%

Materials and Installation

Inspect for approved materials and fixtures. Inspect for proper installation of fixtures, including accessibility, waste receptors, appliances, and appurtenances including clearances, access, and sealing.

2%

Service and Distribution Piping

Inspect the service and distribution piping for proper installation of cold and hot water delivery, identification, sizing, valving, insulation, and safety requirements. Inspect the potable water supply and distribution piping for proper protection against contamination.

4%

What do we offer?

  • Full-Length Mock Test with unique questions in each test set
  • Practice objective questions with section-wise scores
  • An in-depth and exhaustive explanation for every question
  • Reliable exam reports evaluating strengths and weaknesses
  • Latest Questions with an updated version
  • Tips & Tricks to crack the test
  • Unlimited access

What are our Practice Exams?

  • Practice exams have been designed by professionals and domain experts that simulate real-time exam scenario.
  • Practice exam questions have been created on the basis of content outlined in the official documentation.
  • Each set in the practice exam contains unique questions built with the intent to provide real-time experience to the candidates as well as gain more confidence during exam preparation.
  • Practice exams help to self-evaluate against the exam content and work towards building strength to clear the exam.
  • You can also create your own practice exam based on your choice and preference 

100% Assured Test Pass Guarantee

We have built the TestPrepTraining Practice exams with 100% Unconditional and assured Test Pass Guarantee! 

Tags: Commercial Plumbing Inspector (P2) Practice Exam, Commercial Plumbing Inspector (P2) Free Practice Test, Commercial Plumbing Inspector (P2) Exam Questions, Commercial Plumbing Inspector (P2) Study Guide